Bolton & Menk

Most floodplain studies are computed using a HEC-RAS steady state model. The steady state model is an accepted standard, but under certain circumstances can produce results that are far from realistic. Bolton & Menk, a civil, environmental and transportation engineering firm based in Mankato, Minnesota, took on a project that required the firm to perform a floodplain analysis in a heavily developed area with a system of stream channels and a large wetland.

The Challenge Presented by a Wetland “Sink”

Jordan Thole, a water resource design engineer at Bolton & Menk, had primary responsibility for creating a flood map for the lower regions of Sand Creek in Scott County, part of the Sand Creek watershed in the Minnesota River Basin. The challenge presented by this project involved a point near the City of Jordan where a public highway could be overtopped and flood water diverted into a very large wetland. After the flood water entered the wetland, it eventually reconnected with Sand Creek.

When the HEC-RAS model for this segment of Sand Creek was run in a steady state, the wetland filled with water, a situation that would never realistically occur since it would require that the peak flow be sustained for days to fill the wetland. Thole concluded that if the flooded area was to be mapped accurately, it would need to be performed with an unsteady flow model with a complete hydrograph showing the change in flow with time.

Software Development “On Demand”

Thole approached CivilGEO to see if GeoHECRAS could perform the unsteady flow floodplain encroachment analysis that was necessary. At the time, the capability was absent from GeoHECRAS. But, the engineering team at CivilGEO determined that the ability to model unsteady flow floodplain encroachment would add value to the software and could be implemented with a concerted effort from the team. After four days of coding work, the application was working and Thole was able to perform the floodplain encroachment using a fully hydrodynamic flow analysis.

When the HEC-RAS model was run with an unsteady flow, the wetland acted like a sponge, absorbing the flood water and attenuating the flow. The volume of water moving through the area and the flood elevations were reduced significantly. Lower BFEs (base flow elevations) were clearly good news to the large residential areas located in the watershed.

Updating Flood Maps with GeoHECRAS

The floodway had recently been updated and mapped under a FEMA (Federal Emergency Management Agency) mandate. However, the study had been performed using a steady flow analysis. Peak elevations under that analysis were much higher. The City of Jordan requested that all flood maps be updated using an unsteady flow analysis.

Thole reported that the process of updating flood maps was almost effortless as a result of GeoHECRAS’s stream-lined user interface. Older maps often show minimal stream geometry, but with GeoHECRAS additional cross-sections could easily be inserted and the flood map immediately updated. Also, using the Army Corps HEC-RAS would have required a laborious process of building multiple models and running comparisons of surface water elevations through Excel or similar program. Thole said, “GeoHECRAS lets you update maps on the fly. It’s so much easier.”

Thole was also grateful for the technical support he received through CivilGEO. “I wish every piece of software we owned had the technical support that CivilGEO provides.”

About the Customer

In 1949, two earnest Midwesterners–John Bolton and Martin Menk laid the foundation of our journey to serve the communities. They saw people with dreams of a bright future, a desire to thrive, and a common challenge of old, crumbling infrastructure. John and Martin’s were on the mission to help these people and communities become better by listening to what they want, provide the best solutions for their needs, and treat them right. Today, being a major civil engineering planning and consulting firm, their legacy still lives on.

The time savings with GeoHECRAS have been pretty incredible for me. We are probably spending half the time building these models as we did before.

Timothy J. Olson, P.E., CFM
Water Resources Project Manager

Reach us on WhatsApp at +1 (608) 729-5100 CivilGEO on WhatsApp